Add SNMP firewall rules¶

Input of new networks or IP addresses is somewhat modeled after how BSD handles multiple input,
e.g. use a single dot (".") alone on a line to mark end of input.

No rules exists. SNMP access is denied.

Allow SNMP access (port 161/UDP) from up to 5 networks.
(Use IPv4 or IPv6 with CIDR notation, 192.168.0.0/24 or 2001:db8:cafe::/48)

Network #0 (. to end input, Q to Quit) <none>: 192.168.0.0/24
Network #1 (. to end input, Q to Quit) <none>: 2001:db8:cafe::/48
Network #2 (. to end input, Q to Quit) <none>: .

Save the new configuration? (<Y>/n): 
Activate the new configuration? (<Y>/n): 

Rule added
Rule added (v6)

Old rules will not be removed until next reboot of the appliance,
unless they are manually removed thru "Remove active firewall rules" 

Press any key to continue